Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #2: Fri Jul 15 22:25:47 PDT 2005
    george@parkstreet.m5p.com:/ad0/usr/src/sys/i386/compile/PARKSTREET
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 1500+ (1344.29-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 268369920 (255 MB)
avail memory = 257142784 (245 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <SiS 735 host to AGP bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 10 at device 2.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffe000-0xcfffefff irq 5 at device 2.3 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 735 UDMA100 controller> port 0xff00-0xff0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <SiS 7012> port 0xd400-0xd43f,0xdc00-0xdcff irq 10 at device 2.7 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <C-Media Electronics CMI9738 AC97 Codec>
sis0: <SiS 900 10/100BaseTX> port 0xd000-0xd0ff mem 0xcfffc000-0xcfffcfff irq 10 at device 3.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:0a:e6:c8:48:e1
sym0: <810> port 0xd800-0xd8ff mem 0xcfffff00-0xcfffffff irq 10 at device 13.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: [GIANT-LOCKED]
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xcc00-0xccff mem 0xcffffe00-0xcffffeff irq 10 at device 15.0 on pci0
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:40:f4:bb:2e:d4
pci0: <serial bus, FireWire> at device 17.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 11 at device 19.0 on pci0
uhci0: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci0
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 11 at device 19.1 on pci0
uhci1: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci1
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
cpu0 on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc8000-0xcffff,0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
Timecounter "TSC" frequency 1344288956 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 19595MB <MAXTOR 6L020J1/A93.0500> [39813/16/63] at ata0-master UDMA100
ad1: 117246MB <Maxtor 6Y120P0/YAR41BW0> [238216/16/63] at ata0-slave UDMA100
acd0: DVDR <SONY DVD RW DRU-510A/1.0d> at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
(probe9:sym0:0:5:0): phase change 6-7 6@002f538c resid=4.
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD RW DRU-510A 1.0d> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at sym0 bus 0 target 5 lun 0
da0: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI-2 device 
da0: 3.300MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:sym0:0:5:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:sym0:0:5:0): CAM Status: SCSI Status Error
(da0:sym0:0:5:0): SCSI Status: Check Condition
(da0:sym0:0:5:0): NOT READY asc:3a,0
(da0:sym0:0:5:0): Medium not present
(da0:sym0:0:5:0): Unretryable error
Opened disk da0 -> 6
(da0:sym0:0:5:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:sym0:0:5:0): CAM Status: SCSI Status Error
(da0:sym0:0:5:0): SCSI Status: Check Condition
(da0:sym0:0:5:0): NOT READY asc:3a,0
(da0:sym0:0:5:0): Medium not present
(da0:sym0:0:5:0): Unretryable error
Opened disk da0 -> 6
(da0:sym0:0:5:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(da0:sym0:0:5:0): CAM Status: SCSI Status Error
(da0:sym0:0:5:0): SCSI Status: Check Condition
(da0:sym0:0:5:0): NOT READY asc:3a,0
(da0:sym0:0:5:0): Medium not present
(da0:sym0:0:5:0): Unretryable error
Opened disk da0 -> 6
Mounting root from ufs:/dev/ad0s1a